Verifing SNMP Configuration
TheSNMP Testtab allows you to send a test trap to verify that SNMP is configured correctly on theQ-Cloud Protectappliance.
Verify SNMP Configuration
- From theConfigurationmenu, selectNotifications > SNMP > Testto display theSend Test Trappage.
Figure 1:Send Test Trap Page
- Select a destination from the list and clickSend.
If the destination does not receive the SNMP trap
- Make sure that the destination IP address is correct. SeeManaging Destinations.
- Make sure that the community information is correct. SeeManaging Communities
